171 lines
4.3 KiB
C++
171 lines
4.3 KiB
C++
#include <Arduino.h>
|
||
#include <Wire.h>
|
||
|
||
#include <WiFi.h>
|
||
#include "wifi_login.h"
|
||
|
||
#include <U8x8lib.h>
|
||
|
||
#ifdef U8X8_HAVE_HW_SPI
|
||
#include <SPI.h>
|
||
#endif
|
||
|
||
#include <BME280I2C.h>
|
||
|
||
#include <Adafruit_SGP30.h>
|
||
|
||
U8X8_SSD1327_EA_W128128_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||
|
||
BME280I2C bme; // Default : forced mode, standby time = 1000 ms
|
||
// Oversampling = pressure ×1, temperature ×1, humidity ×1, filter off,
|
||
|
||
Adafruit_SGP30 sgp;
|
||
|
||
// setup the terminal (U8X8LOG) and connect to u8g2 for automatic refresh of the display
|
||
// The size (width * height) depends on the display
|
||
#define U8LOG_WIDTH 16
|
||
#define U8LOG_HEIGHT 12
|
||
uint8_t u8log_buffer[U8LOG_WIDTH*U8LOG_HEIGHT];
|
||
U8X8LOG u8x8log;
|
||
|
||
/* return absolute humidity [mg/m^3] with approximation formula
|
||
* @param temperature [°C]
|
||
* @param humidity [%RH]
|
||
*/
|
||
uint32_t getAbsoluteHumidity(float temperature, float humidity) {
|
||
// approximation formula from Sensirion SGP30 Driver Integration chapter 3.15
|
||
const float absoluteHumidity = 216.7f * ((humidity / 100.0f) * 6.112f * exp((17.62f * temperature) / (243.12f + temperature)) / (273.15f + temperature)); // [g/m^3]
|
||
const uint32_t absoluteHumidityScaled = static_cast<uint32_t>(1000.0f * absoluteHumidity); // [mg/m^3]
|
||
return absoluteHumidityScaled;
|
||
}
|
||
|
||
void setup() {
|
||
|
||
//Init Display
|
||
u8x8.begin();
|
||
u8x8.setFont(u8x8_font_chroma48medium8_r);
|
||
|
||
u8x8log.begin(u8x8, U8LOG_WIDTH, U8LOG_HEIGHT, u8log_buffer);
|
||
u8x8log.setRedrawMode(0); // 0: Update screen with newline, 1: Update screen for every char
|
||
|
||
|
||
//Init wifi connection
|
||
WiFi.begin(ssid, password);
|
||
|
||
u8x8log.print("Connecting to SSID:\n");
|
||
u8x8log.print(ssid);
|
||
u8x8log.print("\n");
|
||
u8x8log.print("\n");
|
||
|
||
while (WiFi.status() != WL_CONNECTED) {
|
||
delay(500);
|
||
u8x8log.print(".");
|
||
}
|
||
|
||
u8x8log.print("\n");
|
||
u8x8log.print("WiFi connected\n");
|
||
u8x8log.print("IP address:\n");
|
||
u8x8log.println(WiFi.localIP());
|
||
u8x8log.print("\n");
|
||
u8x8log.print("\n");
|
||
|
||
//Init BME280 sensor
|
||
Wire.begin();
|
||
|
||
while(!bme.begin())
|
||
{
|
||
u8x8log.print("Could not find BME280 sensor!\n");
|
||
delay(1000);
|
||
}
|
||
|
||
switch(bme.chipModel())
|
||
{
|
||
case BME280::ChipModel_BME280:
|
||
u8x8log.print("Found BME280 sensor! Success.\n");
|
||
break;
|
||
case BME280::ChipModel_BMP280:
|
||
u8x8log.print("Found BMP280 sensor! No Humidity available.\n");
|
||
break;
|
||
default:
|
||
u8x8log.print("Found UNKNOWN sensor! Error!\n");
|
||
}
|
||
|
||
|
||
//Init SGP30 sensor
|
||
while(!sgp.begin())
|
||
{
|
||
u8x8log.print("Could not find SGP30 sensor!\n");
|
||
delay(1000);
|
||
}
|
||
|
||
u8x8log.print("Found SGP30 serial #");
|
||
u8x8log.print(sgp.serialnumber[0], HEX);
|
||
u8x8log.print(sgp.serialnumber[1], HEX);
|
||
u8x8log.print(sgp.serialnumber[2], HEX);
|
||
u8x8log.print("\n");
|
||
|
||
// If you have a baseline measurement from before you can assign it to start, to 'self-calibrate'
|
||
//sgp.setIAQBaseline(0x8E68, 0x8F41); // Will vary for each sensor!
|
||
|
||
|
||
}
|
||
|
||
int counter = 0;
|
||
void loop() {
|
||
|
||
//Clear screen
|
||
u8x8log.print("\f");
|
||
|
||
//Read Temperature, humidity and pressure
|
||
float temp(NAN), hum(NAN), pres(NAN);
|
||
BME280::TempUnit tempUnit(BME280::TempUnit_Celsius);
|
||
BME280::PresUnit presUnit(BME280::PresUnit_Pa);
|
||
|
||
bme.read(pres, temp, hum, tempUnit, presUnit);
|
||
|
||
//Read Air Quality
|
||
sgp.setHumidity(getAbsoluteHumidity(temp, hum));
|
||
|
||
if (! sgp.IAQmeasure()) {
|
||
u8x8log.print("Air Quality Measurement failed\n");
|
||
return;
|
||
}
|
||
|
||
u8x8log.print("Temp: ");
|
||
u8x8log.print(temp);
|
||
u8x8log.print("°"+ String(tempUnit == BME280::TempUnit_Celsius ? 'C' :'F'));
|
||
u8x8log.print("\nHumidity: ");
|
||
u8x8log.print(hum);
|
||
u8x8log.print("% RH");
|
||
u8x8log.print("\nPressure: ");
|
||
u8x8log.print(pres);
|
||
u8x8log.print("Pa\n");
|
||
|
||
u8x8log.print("TVOC ");
|
||
u8x8log.print(sgp.TVOC);
|
||
u8x8log.print(" ppb\n");
|
||
u8x8log.print("eCO2 ");
|
||
u8x8log.print(sgp.eCO2);
|
||
u8x8log.print(" ppm\n");
|
||
|
||
//Get Baseline readings every 30s
|
||
counter++;
|
||
if (counter == 30) {
|
||
counter = 0;
|
||
|
||
uint16_t TVOC_base, eCO2_base;
|
||
if (! sgp.getIAQBaseline(&eCO2_base, &TVOC_base)) {
|
||
u8x8log.print("Failed to get baseline readings\n");
|
||
return;
|
||
}
|
||
u8x8log.print("Baseline values: eCO2: 0x");
|
||
u8x8log.print(eCO2_base, HEX);
|
||
u8x8log.print(" & TVOC: 0x");
|
||
u8x8log.print(TVOC_base, HEX);
|
||
u8x8log.print("\n");
|
||
}
|
||
|
||
delay(1000);
|
||
|
||
}
|